A Step By Step Guide on How to Clean Swimming Pool Tile Grout

All grout, whether it is bathroom tile grout or floor grout or swimming pool grout, is mostly made the same way. In nature, grout is a compound made out of a mixture of cement and water. The mixture solidifies and becomes a hard material to provide your tiles with optimum support. Other than its usage as a decorative spacer, it provides your tiled surface with the integrity that it needs. Grouts prevent ceramic tiles from damage caused by water and other chemical compounds like chlorine that are usually found in swimming pool water. 

While other forms of spacing compounds will deteriorate from prolonged exposure to such substances, grout holds its integrity and resists erosion. That is precisely why grouts are so essential to applications that are exposed to water-based elements daily. However, according to Melbourne tiling and renovation services, grouts will still become dirty, as they are an ideal surface where mould, mildew and algae can thrive. Still, there is a way of keeping the grouts clean and making them look as if they were installed yesterday. Here is a step by step guide on how to clean your swimming pool tile grouts. 

A Step-By-Step Guide to the Cleaning of Swimming Pool Tile Grouts 

To clean your swimming pool tile grouts like a pro, you will need the following things, all of which are readily available in any household: 

• An over-the-counter Oxygen bleach product
• A Bucket
• A Mop
• A shop broom 
• Some freshwater

Step 1: Drain your swimming pool fully and give it some time for the grout to be completely dry. 

Step 2: Sweep the grout and tiled surface with the help of a shop broom. The stiff bristles of the brush will work to dislodge the dirt, which will make the bleaching solution more effective.  

Step 3: Make an oxygen bleach solution by pouring it on a bucket and mixing it with water. Different product makers would recommend different water-to-bleach ration. Therefore you must read the label carefully and follow the directions imprinted on the name. 

Step 4: Pour some oxygen bleach solution on the swimming pool grouts and mop them carefully. As the oxygen bleach solution has to remain thoroughly wet to be effective, you should not pour it all over the swimming pool surface at once. You should mop only smaller areas at a time because bleach holds the possibility of evaporation. 

Step 5: Allow the oxygen bleach solution to remain on the grout surface for approximately ten to fifteen minutes. The longer your grout surface gets the treatment, the more effective your solution will be to clean the area. After adequate treatment, you will begin to notice the dirt and soot dissolving away, making the grout clean and white as ever. 

Step 6: Sweep the areas again with the broom to remove any remaining particles of dirt and grime that the bleaching solution failed to dissolve. 

Step 7: Rinse the area with some freshwater. Repeat the process over the remaining tiling surface. 

If your tiles are cracked and worn in places, it will be in your interest to call an agency that provides pool restoration in Melbourne. Also, you should be careful with the bleaching solution and wear gloves while handling it.